Edit attributes

Let's add some more information for the symbols in the drawing with attributes. You can either fill the attributes in the properties dialog or with separate functions. We will now use both ways.

Do the following:

Edit the value of the attribute:
1. Select Text/attribute functions > Edit attributes.
2. Select the main switch symbol.
3. Right-click or press Enter. The Edit Attributes dialog opens.
4. For Rated current, enter 125A.
5. Click OK.
Edit text properties:
1. Select Text/attribute functions > Edit text/attribute properties.
2. Select the Al/Cu text below the symbol. The Modify dialog opens.
3. For Value, enter 2xAl/Cu.
4. Click Move.
5. Indicate a new position for the text.
6. Click OK.
Edit the properties in the Properties dialog:
1. Select the first three-gang plug socket.
2. In the Properties dialog, enter 63A as the rated current.
3. Press Enter.
4. Exit the selection mode by pressing Esc.
5. Select the RCD symbol.
6. As the rated current, enter 40A.
7. As the information, enter 30mA.
8. Press Enter.
9. Exit the selection mode by pressing Esc.
10. Select the second three-gang plug socket.
11. As the rated current, enter 32A.
12. Press Enter.
13. Exit the selection mode by pressing Esc.
14. Select the second three-gang plug socket.
15. As the rated current, enter 16A.
16. Press Enter.
17. Exit the selection mode by pressing Esc.
Copy attribute values:
1. Select Edit > Attribute edit > Copy attribute values.
2. Select the first residual current device. The Select attributes to copy dialog opens.
3. Select Residual current and Information.
4. Click Copy.
5. Select the other residual current device.
6. Confirm the selection by right-clicking.
7. Start the function again by right-clicking.
8. Select the 16A three-gang plug socket.
9. Confirm the selection by right-clicking.
10. Select Residual current.
11. Click Copy.
12. Select all the 1-gang plug sockets.
13. Confirm the selection by right-clicking.