F8: Add symbols for inputs and outputs

Let's add symbols for inputs and outputs on the frame.

Do the following:

1. Press F8. The Select Distribution Board Schema symbol dialog opens.

2. As the main group, select Inputs and supplies.

3. As the sub group, select Inputs (no measuring).

4. Select TN-S input, 3-ph..

   

5. Click OK.

6. Indicate the row to which you want to add the symbol.

7. Select a new symbol from the library:

   1. Press F8.

   2. As the main group, select Inputs and supplies.

   3. As the sub group, select Earthing.

   4. Select the Protective earth for Distribution Board symbol.

   5. Click OK.

8. Insert the symbol above the previous symbol.

9. Select another symbol from the library:

   1. Press F8.

   2. As the main group, select Outputs - system without fuses.

   3. As the sub group, select Distribution Board devices.

   4. Select the Socket-outlet, 1x3ph. symbol.

   5. Click OK.

10. Insert the symbol on the group 1 row.

11. Select the same symbol again by pressing F8, and insert it to group 2.

12. Select another symbol from the library:

    1. Press F8.

    2. As the main group, select Outputs - system without fuses.

    3. As the sub group, select Distribution Board devices.

    4. Select the Socket-outlet, 1x1-ph. + 1x3-ph. symbol.

    5. Click OK.

13. Insert the symbol on the group 3 row.

Previous

Next