Swap channel information of selected I/Os

You can swap channel information for two I/Os. For example, if IN1 is connected to A1's channel 1 (pin 1: IN0) and IN2 is connected to channel 2 (pin 1: IN1), after the swap IN1 will be connected to channel 2 (pin 1: IN1) and IN2 will be connected to channel 1 (pin 1: IN0).

Note: Only the channel information, i.e. channel number, pins and address, will be swapped. I/O texts, for example, will not be swapped.

Do the following:

1. Select the I/O tab.

2. Select the two I/O rows whose channel information you want to swap. The selected I/Os need to be connected to I/O card channels.

3. Right-click and select Swap I/O information between channels.

   

   The channel information is interchanged.