Drawing Properties
Production > Assembly Sketch > Settings > Drawing Properties
Drawing Pen
Set the pen number used for the lines in the drawing in Work BreakDown 3D sketches. The default is Pen 4.
This setting affects all the lines in the drawing, except the table border lines or label lines. See Border Pen and Label Pen, respectively.
Pen colours
Pen number colours depend on which colour set has been selected in the Colour setting in Tools > Settings > User Interface > User Interface Settings. The colour set can be selected in any of the Hull applications. You can check the currently used colour for each pen in this setting, and also change the colour set if so desired.
The Hull system administrator can define which colour is used for which pen number in each set in System Management > Extra > User Interface > User Interface Settings.
Vane Enlargement Factor
Set the enlargement factor for vanes drawn in Work BreakDown 3D sketches (the Vane sign fields in the sketch layout).
The minimum value is 0. The default value is 1.
Weld Line Pen
Set the pen number used for weld lines in Work BreakDown 3D sketches. The default is Pen 4.
Pen colours
Pen number colours depend on which colour set has been selected in the Colour setting in Tools > Settings > User Interface > User Interface Settings. The colour set can be selected in any of the Hull applications. You can check the currently used colour for each pen in this setting, and also change the colour set if so desired.
The Hull system administrator can define which colour is used for which pen number in each set in System Management > Extra > User Interface > User Interface Settings.
See Showing weld lines for information on including weld lines in Work BreakDown 3D sketches.
Weld Line Thickness
Set the thickness of weld lines in Work BreakDown 3D sketches. The default value is 4. You can improve the visibility of weld lines in the sketches by increasing the value.
The scale is arbitrary and the value does not represent any specific metric unit.
See Showing weld lines for information on including weld lines in Work BreakDown 3D sketches.
Previous Drawing Pen
If Create sketches, in steps of is set when generating Work BreakDown 3D sketches, the system creates a separate sub-sketch for each production step on the same WBD level.
Parts belonging to the previous production steps are drawn with this pen number on the sub-sketches. If Create sketches, in steps of is not set, this setting has no effect.
The default is Pen 4, which is the same as the default pen used for Drawing Pen. To distinguish between the current and the previous production steps in the sub-sketches, set different pen numbers for Drawing Pen and Previous Drawing Pen.
See Work Breakdown 3D Sketch for information on how to set up and generate Work BreakDown 3D sketches.