Dimension Properties

Production > Template Sketch > Settings > Dimension Properties

Distance Plate-Dimension

Define the distance between the plate edge and a dimension in the template sketch.

Distance Chain Dimensions

Define the distance between chain dimensions in the template sketch.

This setting is applicable only if the Dimension Type setting is set to Chain dimension.

Dimensioning Horizontal Top

Define the side for the starting point of horizontal dimensions located at the top side in the template sketch.

Dimensioning Horizontal Bottom

Define the side for the starting point of horizontal dimensions located at the bottom side in the plate sketch.

Dimensioning Vertical Left

Define the side for the starting point of vertical dimensions located at the left side in the template sketch.

Dimensioning Vertical Right

Define the side for the starting point of vertical dimensions located at the right side in the template sketch.

Dimension Type

Define the dimension type that is used in the template sketch.

Dimension Minimum Partsize

Define the minimum size of a part to get a dimension in the template sketch.

Dimension Minimum Line Length

Define the minimum length of a line to get a dimension in the template sketch.

Step Size

Define the step distance for vertical dimensions in the template sketch.

Dimension Arrow Type And Size

Define the arrow type and size for dimensions in the template sketch.

The first value defines the arrow type. The second value defines the arrow head size, a character a directly following this value indicates an actual value in mm (otherwise screen units are used).

The first and second value must be separated by a comma.

Dimension Character Height

Define the character height of a dimension in the template sketch.

A character a directly following the value indicates an actual value in mm (otherwise screen units are used).

Pen Number Dimension

Define the pen number for dimensions in the template sketch.

Significance

Define the significance (number of decimal places) for dimensions in the template sketch.