Settings

Production > Part Sketch > Settings

Distance Plate-Dimension

Define the distance between the plate edge and a dimension in the part sketch.

Distance Chain Dimensions

Define the distance between chain dimensions in the part sketch.

Dimensioning Horizontal Top

Define the side for the starting point of horizontal dimensions located at the top side in the part sketch.

This setting is applicable only if the Dimension Type setting is set to Absolute dimension.

Dimensioning Horizontal Bottom

Define the side for the starting point of horizontal dimensions located at the bottom side in the part sketch.

This setting is applicable only if the Dimension Type setting is set to Absolute dimension.

Dimensioning Vertical Left

Define the side for the starting point of vertical dimensions located at the left side in the part sketch.

This setting is applicable only if the Dimension Type setting is set to Absolute dimension.

Dimensioning Vertical Right

Define the side for the starting point of vertical dimensions located at the right side in the part sketch.

This setting is applicable only if the Dimension Type setting is set to Absolute dimension.

Dimension Type

Define the dimension type that is used in the part sketch.

Dimension Minimum Partsize

Define the minimum size of a part to get a dimension in the part sketch.

Dimension Minimum Line Length

Define the minimum length of a line to get a dimension in the part sketch.

Dimension Arrow Type And Size

Define the arrow type and size for dimensions in the part sketch.

• The first value defines the arrow type.
• The second value defines the arrow head size. Character a directly following this value indicates an actual value in mm (otherwise screen units are used).
• The first and second value must be separated by a comma.

Dimension Character Height

Define the character height of a dimension in the part sketch.

• Character a directly following the value indicates an actual value in mm (otherwise screen units are used).

Pen Number Dimension

Define the pen number for dimensions in the part sketch.

Pen Number Report

Define the pen number for the report in the part sketch.

Dimension In Plate

Define if dimensions are shown in the part sketch.

Dimension Horizontal

Define if horizontal dimensions are shown in the part sketch.

Dimension Vertical

Define if vertical dimensions are shown in the part sketch.