Layers Colours 2

Production > Plate Cutting Data > DXF Output > Layers Colours 2

Marking This Side ID

Sets the layername and color number for markings on this side of a part (for double sided markings). This setting is applicable only if the Create Marking Lines setting in Production > Plate Cutting Data > Marking > Lines is set to Double sided.

Marking Other Side ID

Sets the layername and color number for markings on the other side of a part (for double sided markings). This setting is applicable only if the Create Marking Lines setting in Production > Plate Cutting Data > Marking > Lines is set to Double sided.

Text This Side ID

Sets the layername and color number for texts of markings on this side of a part (for double sided markings). This setting is applicable only if the Create Marking Lines setting in Production > Plate Cutting Data > Marking > Lines is set to Double sided.

Text Other Side ID

Sets the layername and color number for texts of markings on the other side of a part (for double sided markings).

Blasting Top Line ID

Sets the layername and color number for top blast lines. This setting is applicable only if the Blasting Max. Plate Thickness setting in Production > Plate Cutting Data > Blasting is enabled (set to a value other than zero).

Blasting Bottom Line ID

Sets the layername and color number for bottom blast lines. This setting is applicable only if the Blasting Max. Plate Thickness setting in Production > Plate Cutting Data > Blasting is enabled (set to a value other than zero).

Calibration Symbols ID

Sets the layername and color number for the orientation/positioning models. The symbol color will be the one that has been set for the color number in System Management > Drawings > Pen Colours.