Jumbo Panels

Production > Plate Cutting Data > Jumbo Panels

Separate Coding If 180 Degrees

When set to Yes (default), plates with a knuckle of 180 degrees are coded separately instead of having the whole of the panel coded as one. The DXF file will receive an extra term JUMBO in its name. Logistical information is not stored.

Code Seams

When set to Yes (default), seams are coded. Select No to have no coding for the seams. The DXF file will receive an extra term JUMBO in its name. Logistical information is not stored. Select Mark to have a seam not split a plate. Instead, seams are marked.