Lugs

Production > Plate Cutting Data > Marking > Lugs

Lug Partnumber

When set to Enabled, lug part numbers are shown on coded parts. By default this setting is set to Disabled, and lug part numbers are not shown on coded parts.

This setting must be set to Enabled for the three other settings below to take effect.

Show First Lug Partnumber On Plate

When set to Enabled (default), the part number of the first lug is shown on the coded part. By setting this to Disabled, you can prevent showing the part number of the first lug on the coded part.

This setting only takes effect if the Lug Partnumber setting is set to Enabled.

Lug Partnumber Prefix

Define a text preceding lug part numbers on coded parts.

The prefix can be free text. The type-specific part code can be used as the prefix by entering prpa as the value. The part code can be used to indicate that the lug is a standard lug and not a non-standard one. Part codes are defined in prpa lines in the %ncgnorms%\material.ins file.

This setting only takes effect if the Lug Partnumber setting is set to Enabled.

Lug Partnumber Postfix

Define a text following lug part numbers on coded parts.

The postfix can be free text. The type-specific part code can be used as the postfix by entering prpa as the value. The part code can be used to indicate that the lug is a standard lug and not a non-standard one. Part codes are defined in prpa lines in the %ncgnorms%\material.ins file.

This setting only takes effect if the Lug Partnumber setting is set to Enabled.