Slots

Production > Plate Cutting Data > Slots

Split, Extra Widening

Set how much a split is widened (in mm) when a part is split completely.

Split, Widen Slot Diff. Height

When the split function is applied to two parts that are not of the same height, a slot will be created in one of the two parts. Set the additional widening of this slot here.

Split, Slot Ext. Diff. Height

Set an additional extension for the slot created when two parts of different height are split with the split function.

Slot, Widening On Both Sides

Set how much (in mm) a slot is widened on both sides when the slot is created. Widening slots makes the assembly of slot constructions easier.

Slot, Length Extension

Set how much (in mm) a slot is extended when the slot is created.

Rounding Radius

Set the rounding radius for all slots. Disable this setting b yentering uit as the value.

Radius For Square Holes

Set the radius for square holes. Disable this setting by entering uit as the value.

This setting has effect only when an extended slot is used.

If you set a radius, the size of square holes will be adjusted in relation to the breadth of the slot.