Project Drafts

Projects > Properties > Project Drafts

Define the following ship attributes, used for the Export > Scantlings > Mars2000 and Export to OCX features. The default value for all of the attributes except Bilge Keel is 0.0.

Scantling Draft

Scantling Draft (Td) in mm, as defined in Rules. This value is automatically converted to meters in the export.

Minimum Ballast Draft

Distance in mm from baseline to waterline with minimum ballast. This value is automatically converted to meters in the export.

Heavy Ballast Draft

Distance in mm from baseline to waterline with maximum ballast. This value is automatically converted to meters in the export (Thb in mm).

Block Coefficient Scantling Draft

Block coefficient as defined in Rules, corresponding to the Scantling Draft.

Block Coefficient Minimum Draft

Block coefficient as defined in Rules, corresponding to the Minimum Ballast Draft.

Waterplane Coeff. Scantling Draft

Waterplane area coefficient at the Scantling Draft.

Waterplane Coeff. Minimum Draft

Waterplane area coefficient at the Minimum Ballast Draft.

Maximum Service Speed

Maximum service speed in nautical knots. Also known as the design speed.

Bilge Keel

Indicates the presence of a bilge keel.

Normal Ballast Draft

Vessel draft at normal ballast (Tnb in mm).

Slamming Draft Empty Fore Peak

Design slamming draft at fore peak (ballast empty) (Tf-e in mm).

Slamming Draft Full Fore Peak

Design slamming draft at fore position (ballast full) (Tf-f in mm).

These settings are used in all project locations.