Cutouts

Production > Robot Files > Cutouts

Indication Cutout Left

Set the indication for a cutout at the left side. A maximum of 5 characters can be used.

Indication Cutout Right

Set the indication for a cutout at the right side. A maximum of 5 characters can be used.

Cutout/Hole Angle, Mirrored

Define if the angle direction of a mirrored cutout or hole is standard or reversed. If reversed, a positive angle becomes negative, and a negative angle becomes positive.

This setting is applicable only if the F_ANGLE parameter is used instead of the ROT parameter in the layout file %ncgnorms%\*.ind.

IMPORTANT: Do not use the F_ANGLE parameter in the layout file %ncgnorms%\*.ind for profile sketches. This will result in incorrect angles.

Cutout/Hole Angle, Not Mirrored

Define if the angle direction of a non-mirrored cutout or hole is standard or reversed. If reversed, a positive angle becomes negative, and a negative angle becomes positive.

This setting is applicable only if the F_ANGLE parameter is used instead of the ROT parameter in the layout file %ncgnorms%\*.ind.

IMPORTANT: Do not use the F_ANGLE parameter in the layout file %ncgnorms%\*.ind for profile sketches. This will result in incorrect angles.