Marking

Production > Plate Cutting Data > Shell Plates > Marking

Template Marking Text

Define the marking text.

Template Marking Symbol Offset

Define the distance between two symbols on the template, used to position the template on the shell plate. The distance is measured along the template contour that touches the shell plate. The default value of this settings is 100.0 mm.

Note: If the length of the curved part of the template is equal to or smaller than defined by Template Marking Symbol Threshold, only one symbol will be used, located halfway the contour.

Template Marking Symbol Threshold

Define if one or two symbols are used for positioning the template on the shell plate. If length of the curved template contour is equal to or smaller than the value defined, one symbol is used. Otherwise, two symbols are used. The default value of this settings is 1000.0 mm.

Marking Multiple Template Sets

Define the number of template sets on a shell plate. Up to 8 template sets can be marked. By default only one template set is marked on a shell plate.

When there is a template set present for the selected shell plate and its production information property is set to Yes, this template set will be marked on the shell plate.

Sight Line Presentation

Determines whether a possible sight line is marked on the shell plate.

S. L. Marking Symbol Offset

Define the distance between two symbols on the sight line plane template, used to position the template on the shell plate. The distance is measured along the template contour that touches the shell plate. The default value of this settings is 500.0 mm.

Note: If the length of the curved part of the template is equal to or smaller than defined by S. L. Marking Symbol Threshold, only one symbol will be used, located halfway the contour.

S. L. Marking Symbol Threshold

Define if one or two symbols are used for positioning of the sight line plane template on the shell plate. If length of the curved template contour is equal to or smaller than the value defined, one symbol is used. Otherwise, two symbols are used. The default value of this settings is 2000.0 mm.