Visibility
Presentation > Visibility
Set the following visibility settings:
Profiles
The default profile viewing distance. Only profiles in cross section located within this range are visible.
Above Deck
The default viewing distance for parts in cross section above a deck.
Under Deck
The default viewing distance for parts in cross section under a deck.
Towards Aftship, Starboard
The default viewing distance for parts in cross section towards aftship and starboard.
Towards Foreship, Port
The default viewing distance for parts in cross section towards foreship and port.
Pillar Front View
The default viewing distance for a pillar in front view.
Pillar Behind View
The default viewing distance for a pillar behind the view.
Plate Behind View
The default viewing distance for a plate in plane view behind the view.
Plate Front View
The default viewing distance for a plate in plane view in front of the view.
Pillar In Section Behind View
The default pillar intersection distance for the current view.
Max. Plate Thickness For Lines
The default maximum plate thickness for the plate to be drawn with lines. A plate with a larger thickness will be presented as a face, and will be drawn in full colour if the setting Drawings > View Settings > Hatching Default is enabled.
Face Plate
The default viewing distance for a face plate. If the face plate is located within the range that is set here, it will be presented as a face plate in plane view. Otherwise it will be presented as a face plate in cross section.
Hole Distance In Front Of View
The default viewing distance in front of a hole in a plate, for plates in cross-section.
Hole Distance Behind View
The default viewing distance behind a hole in a plate, for plates in cross-section.
Equipment In Front Of View
The default viewing distance for equipment, in front of the viewing plane.
Equipment Behind View
The default viewing distance for equipment, behind the viewing plane.
Construction Behind Shape
The default viewing distance for construction parts behind the shape (shell views only).
Construction In Front Of Shape
The default viewing distance for construction parts in front of the shape (shell views only).