With this configuration the resulting DXF/DWG contains only one line indicating the plates and brackets in section and not the two lines normally used to indicate the real thickness in the drawing.
The "plotlines" configuration consists of the following files:
- dxf-plotlines.cfg
- tablayerexpplotlines.dat
- tabdashexpplotlines.dat
- tabfontexpplotlines.dat
- tablayerimpplotlines.dat
- tabdashimpplotlines.dat
- tabfontimpplotlines.dat
in the %ncghelps%\dxf directory.
The file dxf-plotlines.cfg contains the line:
bluelines='no'
below label 1 which is responsible for the change of the used lines.