With this configuration all hatches and solid fills are filtered out of the drawing. It depends on the kind of object if some contour is left or nothing at all is left behind.
The " nohatches" configuration consists of the following files:
- dxf-nohatches.cfg
- tablayerexpnohatches.dat
- tabdashexpnohatches.dat
- tabfontexpnohatches.dat
- tablayerimpnohatches.dat
- tabdashimpnnohatches.dat
- tabfontimpnohatches.dat
in the %ncghelps%\dxf directory.
The file dxf-nohatches.cfg contains the following lines:
- removehatch='all'
- removefr7hatch='yes'
- removeprhatch='yes'
below label 1 which trigger the filtering mechanism.