Girder cutout type 350

Cutout type 350

Cutout with collar plate around a plate in cross section with a face plate. This cutout is totally related to the plate in cross section with its face plate. The opening will be defined by the type file. In this type file the V variables are defined as fixed variables.

In this case there is no associated Hole types dialog for the Create Holes and Modify Holes functions to define the dimensions. All dimensions are defined by V variables.

LABEL 1
EXIT
 
LABEL 3
VarStr = ''
EXIT
 
LABEL 4
VarStr='R5 10 R6 200 R7 50 R8 50'
EXIT

No questions

 

For creating or modifying the icon in the System Management application, variables R5, R6, R7 and R8 must be defined in Label 4, because the System Management application does not define these variables in that situation. You could define even the quest variables, but that is not required.

 
7 0 0
10 30 40 -1 R7+V2 R6+R5+V1 R8+V2
L 0 0 0 V5
L 0 V5 V6 V5
C V6 R7 V2*V4
L V6+V2 R7 V6+V2 R8*V4
C V6 R8*V4 V2*V4
L V6 R8+V2*V4 0 R8+V2*V4
L 0 R8+V2*V4 0 0
E 0 R8+V2*V4 R6+V2 R7+V2
 
T Girdercutout type350
D TY "Girdercutout type350"

The lines with lower case letters are for the collar definition.

V variables

Variable name

Function

V1

Height of the cutout

V2

Width and height of the cutout and the radius

V4

Direction of the circle, or makes the y direction negative.

V5

Width of the cutout

V6

Height of the cutout

V7

Width of the cutout