Base bevel positions by profile type

The table below depicts the base bevel positions by profile type. The red dots are positioned on the molded side of the profile while the blue ones are located on the thickness side. With the exception of the circular profile types, the dots occur in pairs (molded & thickness sides). If a particular profile has more than one pair of bevel positions, the bevel applied to these positions is mirrored if the thickness position is to the left of the molded side. For example, if the bevel applied to an HB profile is V+, it is V+ on the molded side (left side in the table below), but V- on the thickness (right) side.

Profile section	Abbreviation	Code
	ST	400
	HP	401
	HG	402
	HO	403
	RD	404
	PY	405
	HR	406
	VK	407
	TB	408
	HB	409
	KO	410
	UP	411
	HA	413
	PU	414
	IP	415
	AS	416
	UN	417
	FB	418
	HM	419
	IE	420