|
Navigate > Lock cursor to line >
|
|
Define line
|
A
|
Locks the cursor to a line whose direction the user defines.
|
|
Parallel to X
|
Alt+X
|
Locks the cursor to a line whose direction is parallel to the X axis.
|
|
Parallel to Y
|
Alt+Y
|
Locks the cursor to a line whose direction is parallel to the Y axis.
|
|
Parallel to Z
|
Alt+Z
|
Locks the cursor to a line whose direction is parallel to the Z axis.
|
|
Nearest centerline
|
F11 or Shift+C
|
Locks the cursor to the nearest centerline of an air duct, beam or pipe.
|
|
Nearest edge
|
Shift+E
|
Locks the cursor to the nearest edge.
|
|
Nearest 2D line
|
Shift+D
|
Locks the cursor to the nearest 2D line.
|
|
Navigate > Lock cursor to plane >
|
|
Point and normal
|
R
|
Locks the cursor to a plane the user defines by defining a point and the direction (normal) of the plane.
|
|
Three points
|
V
|
Locks the cursor to a plane the user defines by defining three points.
|
|
2D line extended
|
Shift+F
|
Locks the cursor to a plane that is generated from a 2D line.
|
|
Navigate > Fix X, Y or Z
|
|
Fix X
|
X
|
Fixes the X coordinate to a user-defined value.
|
|
Fix Y
|
Y
|
Fixes the Y coordinate to a user-defined value.
|
|
Fix Z
|
Z
|
Fixes the Z coordinate to a user-defined value.
|
|
Release X
|
Shift+X
|
Releases the fixed X coordinate.
|
|
Release Y
|
Shift+Y
|
Releases the fixed Y coordinate.
|
|
Release Z
|
Shift+Z
|
Releases the fixed Z coordinate.
|
|
Navigate >
|
|
Release cursor
|
Shift+A
|
Releases the cursor so that it can move in any direction.
|
|
Set coordinates
|
C
|
Locks the cursor to user-defined coordinates.
|
|
Set distance
|
D
|
Locks the cursor to a user-defined distance from the previously active point.
|
|
Set radius & angle
|
S
|
Locks the cursor to a spherical coordinate that the user defines by defining a radius and two angles.
|
|
Position from reference grid
|
Ctrl+R
|
Locks the cursor to a user-defined distance from the nearest reference plane.
|
|
Move to nearest… Connection
|
Q
|
Locks the cursor to the nearest connection point of an air duct, cable tray, or pipe, beam point, or Hull construction part's hole node.
|
|
Move to nearest… Pipe geometry point
|
W
|
Locks the cursor to the nearest pipe geometry point or object's center point.
|
|
Move to nearest… Vertex
|
E
|
Locks the cursor to the nearest vertex or the end point of a cylindrical primitive.
|
|
Move to nearest… Inside vertex
|
Alt+E
|
Locks the cursor to the nearest inside vertex of a straight air duct part or some other part that has been modeled as a duct shape.
|
|
Move to nearest… 2D vertex
|
Shift+W
|
Locks the cursor to the nearest 2D vertex of a 2D line or 2D arc.
|
|
Move to nearest… Surface
|
F
|
Locks the cursor to the nearest surface or planar face.
|
|
Back to original location
|
Shift+R
|
Moves the cursor back to the previously active point.
|
|
Go to point set average
|
G
|
Locks the cursor to an average point calculated from a set of user-defined points.
|
|
Go to surface of pipe
|
Alt+P
|
Locks the cursor to a surface point that the user selects from a pipe. To use this command, the pipe centerline must be within 100 mm of the digitized point. (EloTools)
|
|
Go to hull shape
|
|
Locks the cursor to a position defined by the hull shape.
|