Green

Add extra (production) length and/or bevel information to the end shapes of profiles.

In the graphical window, select the end shapes of the profiles in view or in flange view to which you want to add extra length and/or bevel information.

See also Modifying bevels and Adding bevels to profile end types and face plates.

Adding/Removing Extra Production Length

Extra length – Specifies the extra production length to be added to the selected end shapes. If extra length has already been added previously, an empty value here leaves the extra length unchanged.

Remove extra length – Removes a possible previously added extra length from the selected end shapes.

3rd & 4th end shape

• Bevel code selection list – Sets the bevel code to be added to the 3rd & 4th end shapes of the selected profile ends.
• Angle – Specifies the angle of the bevel. An empty value or 0 (zero) will result in a "no bevel" indication.
• Remove bevelcode – Removes the possible previously added bevel code from the 3rd & 4th end shapes of the selected profile ends.

1st & 2nd end shape

• Bevel code selection list – Sets the bevel code to be added to the 1st & 2nd end shapes of the selected profile ends.
• Angle – Specifies the angle of the bevel. An empty value or 0 (zero) will result in a "no bevel" indication.
• Remove bevelcode – Removes the possible previously added bevel code from the 1st & 2nd end shapes of the selected profile ends.

Dimension Position

Specifies the position, relative to the end shape, where the dimension with the bevel code and/or extra production length should be placed, or if no dimension should be placed.