Frame 30

Frame 30

The floor "Bulkhead Fr. 30" has been created by copying the floor "Bulkhead Fr. 27". According to the sheet, you have to make the following modifications to floor "Bulkhead Fr. 30":

  • Change the upper end types of stiffeners at 4620, 5280 and 5940 off CL from type B into type C with a corner radius of 35 mm;
  • Change the upper end relation of stiffeners at 4620, 5280 and 5940 off CL to 0 mm;
  • Modify the body direction of stiffeners at 4620, 5280 and 5940 off CL;
  • Add three welding holes with radius 35 mm around the seams;
  • Change the radius of the inner welding hole from 35 into 75 mm;
  • Change the size of the three creep holes from height 600 mm and breadth 450 mm into 850 mm and 450 mm.

Overview of actions:

  1. Open drawing frame view "108-30"
  2. Choose Update active block
  3. Place standard text "Frame 30" above view using current control
  4. Change the upper end types of stiffeners at 4620, 5280 and 5940 off CL from type B into type C
  5. Modify the upper end relation of stiffeners at 4620, 5280 and 5940 off CL from 40 into 0
  6. Modify the body direction of all stiffeners
  7. Add three welding holes with radius 35 mm
  8. Change the radius of the inner welding hole from 35 into 75 mm
  9. Modify the size of the three creep holes from 600/450 to 850/450 mm

Additional description of actions:

  1. Change the upper end types of stiffeners at 4620, 5280 and 5940 off CL from type B into type C

The modification of end types is similar to the modification of end types of upper stiffeners at frame 29

  1. Modify the body direction of all stiffeners

Modifying the direction of stiffeners is similar to modifying the direction of upper stiffeners at frame 29