Add cable marking

Next, we will connect and mark the cables W01 and W02.

Do the following:

  1. Select Schematics tab > Markings group > Cable.

  2. Draw the cable line across the wires: indicate the first and second points.

  3. Define the cable information:

    1. Select the safety switch cable W01.

    2. For From and To, select From Device and To Device.

    3. Select Cable type management, and find the cable type MCMK 3x1,5/1,5.

    4. Click OK.

  4. Mark the cable and wire information to the drawing.

  5. Indicate the ending point for the cable marking.
  6. Connect and mark cable W02 in the same way.
Previous Next