Compensation Rules

Construction > Welds/Bevels > Compensation Rules

Create rules for automatic shrinkage compensation for bevels.

Automatic shrinkage compensation is applied to bevels for which automatic compensation has been set in the bevel properties. Bevel properties for predefined bevels are set by the Hull administrator in System Management > Construction > Welds/Bevels > Predefined Bevels. Shrinkage compensation is set in the Weld tab. Automatic shrinkage compensation can also be set while inserting or modifying a single bevel, in the Weld tab in the Bevel dialog which opens when you start the insert or modify function.

See Defining rules in System Management for information on how to create rules.